Practical carpentry and timber repairs across BrisbaneEmail your job details

Cabinet repairs · Brisbane

Kitchen Cabinet Repairs & Installation Brisbane

Mel One repairs existing kitchen cupboards, wardrobe and vanity doors, hinges, handles and drawers in Brisbane. We replace suitable worn hinges or missing handles, realign dropped doors, refit detached drawer fronts and repair sticking drawers. Local peeling paint can also be touched up in a similar colour once the surface and existing finish have been checked; an exact colour match is not guaranteed. This is a local cabinet repair, not a complete kitchen respray. Damaged doors or drawer components can be replaced where compatible parts and sound fixing points are available; send photos and list each affected component and quantity so these details can be checked before quoting.

For additional shelves or new storage rather than repairing doors or drawers, see shelving and storage installation.

Parts and problems we work on

Where this carpentry repair starts

Cabinet door is loose, dropped or will not close properly

Hinges are loose, worn or pulling out of alignment

Drawer front is loose, damaged or sitting unevenly

Door gaps, handles or cabinet hardware need adjustment

Real cabinet repair case

Before repair, refitting and final alignment

The cabinet record starts with hinge locations, loose drawer fronts and internal panels. The documented work refitted fronts, adjusted hinges and aligned the retained cabinetry. After views show the upper, base and tall doors and drawer fronts with straighter gaps; no complete kitchen respray or new cabinet installation is implied.

Close-up of concealed hinges inside a white kitchen cabinet before realignmentBefore repair
Concealed hinges inspected before the cabinet door was realigned.
Kitchen drawer unit with loose fronts and internal panels before repairBefore repair
Drawer fronts and internal panels before refitting and alignment.
White raised-panel kitchen cabinet doors aligned above the rangehood after repairAfter repair
Upper cabinet doors refitted and aligned after the repair.
Refitted white base cabinet doors beneath a kitchen benchtop during final alignmentAfter repair
Base cabinet doors refitted and checked for more even gaps.
White kitchen drawer fronts refitted and aligned after repairAfter repair
Drawer fronts reinstalled and aligned during final checks.
Tall white kitchen cupboard doors aligned after hinge adjustmentAfter repair
Tall cabinet doors adjusted for a straighter meeting gap before final touch-up.
Real project photography supplied by the business.View the full before & after case

Repair, replace or inspect?

Adjust, repair or replace the cabinet component?

Adjustment may be enough when hinges, fixings and cabinet material remain sound. Split board, repeated pull-out around fixings or damaged drawer components can require a local repair or replacement part. Photos help identify which option is realistic before a visit.

Ask about your job

Repair, preparation and finish

How we repair doors, hinges and drawers on existing cabinets

See the cabinet refitting and alignment record

  1. 1

    Identify the failing component

    We check the hinge, mounting plate, board fixing, drawer front, runner and cabinet box separately. A dropped door with sound board can need adjustment; a hinge pulling out of swollen board needs a different solution.

  2. 2

    Compare adjustment, parts and replacement

    Usable cabinets can often stay while compatible hinges, runners or fronts are repaired or replaced. Board breakdown, repeated fixing failure or unavailable systems may require a local panel change or an agreed retrofit. A similar-looking runner is not automatically interchangeable.

  3. 3

    Protect the kitchen and keep parts identified

    We protect benchtops, flooring and retained fronts, clear access to the affected fittings and keep removed parts with their locations. Measurements and hardware details are checked before ordering or altering a drawer box. Plumbing and electrical connections stay with the relevant trade.

  4. 4

    Refit and align the selected parts

    We repair suitable fixing points, fit compatible hardware, refit loose fronts and align doors and drawers to the cabinet. Where replacement parts change the mounting layout or storage space, those changes are agreed rather than discovered after cutting.

  5. 5

    Finish only the agreed local area

    Local touch-up can include careful preparation and a compatible primer or finish where the existing surface allows it. Coated board, veneer and painted timber need different treatment. We do not sand through a factory face or present a small touch-up as a complete kitchen respray.

  6. 6

    Check travel, closing and the retained finish

    We check normal drawer travel, door closing, gaps and handles, then explain any remaining damage or parts still required. The handover identifies the components refitted and the work completed.

Cabinet repairs FAQ

Useful questions before you book

These answers help you prepare a more useful Brisbane carpentry enquiry.

Can a kitchen cabinet door be realigned?

Often, depending on the hinge, fixing points and cabinet condition. Send a full view of the door plus close-ups of the hinges and gaps around it.

Can loose drawer fronts or cabinet hinges be repaired?

Some loose fronts, hinges and fixings can be refitted or replaced. Damage to the board or internal drawer parts may change the repair.

Can you install flat-pack or pre-made cabinets?

We assess and carry out selected cabinet assembly and installation. Tell us what you want installed and whether you already have a product; we check the room, product and measurements before confirming the scope.

Can only the damaged cupboard doors or drawer fronts be replaced?

We can replace selected doors or drawer fronts where the cabinet boxes and fixing points remain suitable. We check measurements, material, profile and hardware, then explain available matches and any visible difference beside retained fronts.

What should I send for a cabinet repair quote?

List the affected component types and quantities, such as two doors, three hinges, one missing handle or one stuck drawer. Include a wide photo of the cabinet, close-ups of each issue, approximate measurements and any available hardware, finish or product details. This helps separate adjustment, replacement parts, local touch-up work and installation before the quote is confirmed.

Does cabinet installation include reconnecting a sink or electrical appliances?

Not automatically. Cabinet fitting is a carpentry scope. Plumbing connections, hard-wired electrical work and appliance reconnection must be identified separately and assigned to the appropriate licensed trade where required.

The old drawer runners are no longer available. Can the cabinet stay, and what would a retrofit change?

A sound cabinet may still be kept, but a similar-looking runner is not necessarily a direct replacement. Ask for the existing system, mounting method, installed length, side clearance and drawer-box connection to be identified before parts are ordered. An exact spare, a compatible replacement set and a retrofit that alters the drawer are different scopes. A retrofit may change fixing positions, drawer dimensions or usable space; agree those changes and the appearance beside retained fronts before cutting. The quote should separate part identification and supply, removal and refitting, any box or panel modification, alignment and finishing, including a return visit if parts need ordering. If the cabinet material cannot hold the new fixings, compare local cabinet repair or an affected-component replacement as well. Email a whole-cabinet photo and any safely visible runner markings, and say which fronts, handles and storage space you want retained. Normal travel and closing should be checked with the accepted repair, rather than simply fitting a new rail.

Ready to check the job?

Send the suburb, photos and result you want

We use the details to check the repair needed and tell you whether we can quote from photos or need to inspect it.

CallEnquire