Practical carpentry and timber repairs across BrisbaneEmail your job details

Fences & gates · Brisbane

Timber Fence & Gate Repairs Brisbane

We repair timber fences and gates across Brisbane, including fences leaning or blown down after strong winds, broken or missing palings, loose rails and damaged posts. We check the affected section and adjoining supports before agreeing what to retain, repair or replace. Work can range from a local repair to rebuilding a section or complete run. Send your suburb, approximate fence length and existing photos by email.

Parts and problems we work on

Where this carpentry repair starts

Gate drags or will not close after a storm

Broken, loose or missing timber palings

Loose fence rails or damaged posts

Fence leaning or a section blown down after strong winds

An old timber fence that needs section or whole-run replacement

Timber gate repair record

Broken gate paling before and after replacement

The before views identify the fractured latch-side timber beside the gate frame. The recorded after view shows the central paling replaced and the dark finished gate area restored. This documents a timber component repair, not an iron-gate hinge repair.

Split and missing timber beside the latch-side frame of a dark painted gateBefore
Before: split and missing timber around the latch-side gate paling.
Close-up of splintered timber on a painted gate paling beside the metal frameCondition photo
Before: fractured timber where the paling meets the gate frame.
Repaired dark painted gate with the broken central timber paling replacedAfter
After: the fractured central paling is replaced and the latch-side area is restored.
Real project photography supplied by the business.View the gate repair comparison

Fence straightening and support

Added steel posts for a leaning timber fence

This repair retained the existing timber fence, straightened the leaning section and added steel posts for support. The photos show the earlier lean and the added posts along the same garden fence.

Leaning timber fence beside garden trees before straightening and added supportBefore repairOpen full-size ↗
Before: the existing timber fence leaning along the garden boundary.
Steel support posts fitted along the retained timber garden fenceAdded steel supportOpen full-size ↗
After support work: steel posts alongside the retained timber fence.

Does the fence keep leaning after rain or strong winds?

We check the post bases, rails, connections and adjoining fence, including whether a whole section has moved or only one fixing has failed. Tell us when the lean appeared and where previous repairs were made. The existing case shown here retained the timber fence and added steel posts; we confirm on site whether that approach suits your fence. Keep clear of unstable sections rather than trying to straighten them yourself.

What helps us assess your fence?

Send your suburb, approximate fence length and height, previous repair details and access to both sides. Email existing wide views, post-base and gate photos taken from a safe position; you do not need to approach an unstable section. Tell us whether the gate still opens, closes and latches. We identify the retained, replacement or reinforced parts and agreed finishing in the quote.

Existing timber condition

Repair the fence or replace a section?

These before-repair site photos show weathered timber fencing and a rail detail.

Weathered timber boundary fence with gaps between damaged palings
Weathered timber boundary fence with gaps between damaged palings
Close view of a weathered fence rail and its fixing points
Close view of a weathered fence rail and its fixing points

We check posts, rails, palings, fixings and ground conditions before explaining local repair, component replacement or a renewed run. Suitable sound material can remain; wider deterioration may favour replacement. The quote identifies what stays and what changes, taking account of the intended use and budget.

Discuss the fence repair scope

Completed fence replacement

From new framework to a finished garden fence

One project record shows the replacement fence framework during installation and the completed dark vertical-profile finish. The old fence is not pictured.

View the fence replacement project

Repair, replace or inspect?

Timber fence replacement or a targeted repair?

We can replace a few broken palings or refix a loose rail when the surrounding timber, posts and connections remain sound. If a post, rail or fixing point has failed, we check its base and adjoining sections, then replace or reinforce the affected parts as needed. A fallen section with several failed supports or widespread decay may need rebuilding rather than refixing individual boards. For a gate that will not close, we check the frame, hinges, latch, post alignment and ground clearance; moving the latch alone may leave the cause unresolved. The quote identifies the retained and replacement sections, materials, removal and disposal, access, gate work and any agreed painting or finishing.

Ask about your job

Repair, preparation and finish

From leaning posts or a dragging gate to the right repair

See the retained fence and added supports

  1. 1

    Check the whole fence and gate support

    We check posts, rails, palings, hinges and the gate’s path, together with the ground and signs of recurring movement. A broken paling, a sagging gate frame and a leaning fence line are different faults.

  2. 2

    Retain sound sections or renew the run

    Useful existing timber may suit straightening and site-appropriate support or selected replacement. Widespread decay or failed posts can favour a new section or full run. Added steel support is one recorded solution, not the default for every fence.

  3. 3

    Plan access, protection and retained items

    We agree which fence sections remain, how access on each side is arranged and how gardens and existing gates are protected. Removal and disposal are identified before demolition; boundary or shared-access matters are settled with the authorised people.

  4. 4

    Repair or rebuild the affected components

    The agreed work can renew posts, rails, palings, gate bracing or hardware, or rebuild the defined fence run. Connections suit the actual timber and supports. Gate alignment is addressed with the supporting post and frame rather than only moving the latch.

  5. 5

    Prepare the agreed paint or timber finish

    If painting is included, we remove failed coating and prepare the retained and new timber for a compatible system. Bare areas receive the required primer or sealing treatment. A painted finish does not prove the posts, foundations or hidden fixings are sound.

  6. 6

    Check the line and normal gate operation

    We review the repaired fence line and accessible connections, and check any included gate’s movement, ground clearance and latching. The job record identifies what stayed, what changed and any maintenance or further support work still needed.

Fences & gates FAQ

Useful questions before you book

These answers help you prepare a more useful Brisbane carpentry enquiry.

Can a sagging timber gate be repaired?

We check the gate frame, hinges, latch and supporting posts, including movement after a storm. A sound frame and post may suit rehanging, bracing or compatible hardware replacement. A split frame or moved or damaged post may need repair or replacement before the gate can close and latch properly. We check its opening, closing and latch engagement after the agreed work.

Can only damaged fence sections be replaced?

Yes. We can replace damaged palings, a rail or an individual fence section while retaining sound adjoining timber and supports. We check the posts, connections and both ends of the proposed repair so the new section has secure fixing points. If damage extends through several supports, we explain the larger replacement area before quoting.

Can you remove an old timber fence and replace the whole run?

Yes. Mel One undertakes timber fence replacement, including removal of the agreed old sections and rebuilding the fence. Send the approximate length and height, photos of the posts and fence line, access details and whether a gate is included. Materials, disposal, any retained sections and applicable site requirements are confirmed in the quote before scheduling.

Can fence repairs include painting?

Yes, fence repair and painting can be scoped together. We first identify which timber needs repair or replacement, then agree the surface preparation, finish and extent of painting. Painting alone does not repair rotten timber or unstable posts.

Ready to check the job?

Send the suburb, photos and result you want

We use the details to check the repair needed and tell you whether we can quote from photos or need to inspect it.

CallEnquire